The AAP recommends that all infants ride rear facing starting with their first ride home from the hospital. All infants and toddlers should ride in a rear-facing seat until they reach the highest weight or height allowed by their car safety seat manufacturer. Most convertible seats have limits that will allow children to ride rear facing for 2 years or more. When infants outgrow their rear-facing-only seat, a convertible seat installed rear facing is needed. Three types of rear-facing seats are available: rear-facing-only , convertible, and all-in-one. When children reach the highest weight or length allowed by the manufacturer of their rear-facing-only seat, they should continue to ride rear facing in a convertible or all-in-one seat. Always read the vehicle owner's manual and the car safety seat manual before installing the seat.
If you are using the seat belt, you should use the rear-facing tether too. You will use this strap to create a rear-facing tether anchor.
If you have an older Combi Coccoro or Peg Perego Primo Viaggioyour seat did not come with this short strap - but you can order one from the company.
For Combi seats, order online here. The rear-facing tether needs to be attached to something that is metal and part of the structural frame of the car. The track for the front seat is typically the best and only acceptable location.
Conventional wisdom used to be that car seats should be thrown away after even the most minor accident. Car seats should be replaced after a moderate or severe crash. Your location is set for: Go Loading Get a quote.
RSS Feed. Connect with us on Facebook. Connect with us on Twitter.
Connect with us on Instagram. Connect with us on Pinterest. Connect with us on YouTube.
Connect with us on LinkedIn. Newsletter Signup Sign up for newsletter e-mails. You May Also Like. Car Seat Installation: What You Need to Know Years ago, installing a car seat usually required complicated maneuvers with seat belts to properly secure the seat. Get a quick, personalized insurance quote today. Yes No.
Installation Tips for Rear-Facing Seats:
Log in Facebook. No account yet?
Hook up rear facing car seat
Learn why people trust wikiHow. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. Together, they cited information from 10 references.
Learn more Installing a Front Facing Car Seat. Tips and Warnings.
Related Articles. Article Summary. Method 1 of Separate the carrier from the base.
This video here shows how to set up for a Swedish-style (down to the floor of the car) rear-facing tether. While the video shows a Diono seat, the set up is the same for . Feb 24, A car seat should be approved for a baby's weight. Very small babies who can sit safely in a semi-reclined position usually fit better in rear-facing-only seats. Preterm infants should be tested while still in the hospital to make sure they can sit safely in a semi-reclined position. Babies who need to lie flat during travel should ride in a. The rule: A child should be in a rear-facing seat from birth until he reaches the height and weight limit of his rear-facing seat. Installation Tips Use either the lower anchors or the seat belt.
Most rear-facing seats consist of two parts: the base and the infant carrier. You will install the base, the part that remains in the car. Usually, there is simply a lever or button to activate.
How to Install: Cosco Scenera Next REAR facing with LATCH
Anchor the base to your car's back seat. If your car manufacturer included these, snap the hooks onto the metal bars at those designated spots.
Rear-Facing Car Seats for Infants & Toddlers
Check the manufacturer's instructions if you aren't sure if your car or seat has this option, or how to use it. Thread the seat belt through the base, alternatively. Feed the belt through designated openings in the base and buckle it.
The seatbelt should fit cleanly, and not be twisted or bunched up. Every vehicle and seat is different, so it's important to get this right.
Mar 14, Rear-facing convertible, grade C: Our convertible car seat's rigid Latch connectors didn't play nicely with the CR-V's Latch system. The lower Latch anchors sit at the bottom of vertical.
Not latching the seat belt correctly can increase the risk of the child getting injured in an accident. Pop the infant carrier into the base.
Set it onto the base so that the child would face the rear. It should click when it's in the right position. You can then practice taking the carrier out by activating the lever or button and setting it back into get a feel for things.
Double check the base angle. Rear facing car seats usually have bases that can rest at different angles.
To install this type of seat using the seat-belt system, follow these basic steps. Place the car seat base in the back seat of your vehicle, then thread the seat belt through the rear-facing belt Author: Peter Gareffa. Oct 01, Car seats should always be installed in the back seat of the vehicle, and according to the American Academy of Pediatrics' recommendations, all infants and toddlers should ride in a rear-facing car seat until they are 2 years old or until they reach the maximum height and weight allowed by the manufacturer of their car seat. The AAP. Cosco car seats install in the back seat of a vehicle to hold children securely and safely in the event of an accident. The padded Cosco seat is held in place by the vehicle's seat belts, with two clips that attach to the latch anchors under the back seat. Proper installation of a Cosco car seat is vital for the.
The youngest infants will need to be in the more reclined position. This helps them breathe properly. Change the base angle if the level is not correct or your child. Usually, this involves turning the base over and rotating a piece.